Going to Build

Shaker Table Completed!

Well, the Shaker table is now complete and ready for sale! As I mentioned in my previous post, I used 3 coats of a Tung Oil finish followed by thinned coats, about 1-2 lb cuts of shellac; I used about 3 coats on the main part of the table and 5 coats on the top. The shellac was rubbed out with 0000 steel wool and paste wax. I think the oil does a nice job of revealing the stripes in the tiger maple. I know a lot of people like to use a dye to do that, but I think oil works great, its simple and more natural. As this is cherry, the piece will get darker over time and with exposure to sun. So, here it is!